GOLDWOOD INDUSTRIES
MR & BWR Flush Door

MR & BWR Flush Door

Send Inquiry

We are putting forward a world-class MR & BWR Flush Door. These doors find their usage areas in balconies, bathrooms and toilets. Made with compact wood fillers for high strength. These kind of flush doors have large and uniform frames. Furthermore, our valued clients can buy this excellent range of MR & BWR Flush Door in several different designs and finishes at the best industry prices and given time frames.

Our offered Flush Doors are of premium borer-proof doors along with HIT advantage. These are made out of top-grade solid content resin, hardwood fame and high density battens as well. These are conditioned to avoid bending or warping. These well finished flush door has smooth surface for lamination. It offers dimensional accuracy as well as stability in changing humidity and has a great screw holding capacity, and high shock & buckling resistance.

These Flush doors are cent percent boiling-water proof.

Kiln seasoned stiles,
rails and engineered wood strong core of the door are well treated with preservatives so as to improve its natural stability. From the development of Phenol Formaldehyde resin to BWP bonding of core woods and veneers, all the processes are done under one roof - ensuring outstanding quality.

Key Features :

  • Conditioned doors and warp & twist resistant.
  • High load bearing capacity and 100% boiling water proof
  • Extra lock rail for fittings
  • Sleek surface for lamination of veneer or MICA.

Technical Specification (IS : 2202)


Test

ISI REQUIREMENT

Observed Value

1

Dimension

Length, Width - + 5 mm Thickness - + 1 mm

With limits

2

Squareness

Deviation not more than 1 mm on a length of 500mm

Deviation below 1 mm

3

General Flatness

Twist cupping, warping not to exceed 6 mm


4

Local Planeness

Depth of deviation at any point to be less than 0.5 mm

With limits

5

Impact Indentation Test

Depth of indentation not to exceed 0.2 mm

With limits

6

Edge Loading Test

Deflection of edge with max. To be less than 5 mm

With limits

7

Shock Resistance Test

No visible defect after test

No visible defects

8

Buckling Test

Initial deflection - < 50 mm residual deflection - < 5 mm

With limits

9

Slamming Test

No visible damage after Test

No visible defects

10

Misuse Test

No deformation after Test

No deformation

11

Varying Humidity Test

No visible warping, twisting or de-lamination

No such defects observed

12

End Immersion Test

No de-lmination at the end

No de-lemination

13

Knife Test

Minimum Pass Standard

Excellent

14

Glue Adhesion Test

No de-lamination

No de-lamination

15

Screw Withdraw Test

Load to withdraw screw to be more than 1000 N

Load - > 1000 N